High Performance Engineering Plastics in Singapore
Swees Engineering lists PI, PEEK, PVDF, PAI, PEI, PPS and Rulon sheet and rod options on this page. These material families are considered when a general-purpose plastic does not meet a part’s load, temperature, wear, chemical or electrical requirements.
Compare by service conditions
Start with the operating temperature, load, wear pair and chemicals in contact with the part. Then compare the exact grade and filler package, because properties vary within each family. The material descriptions below are an introduction; the specific grade datasheet should govern design limits and approvals.
Request the right stock shape
Send the material or performance target, drawing, sheet thickness or rod diameter, quantity and any required certification. We can check the listed stock shapes and current availability for a suitable option.
PI (polyimide)
The catalogue lists polyimide sheets and rods under Vespel grades SP-1, SP-21, SP-22, SP-211 and SP-3. PI may be considered for wear parts at demanding temperatures. Verify the exact grade, operating limit and trade-name documentation before specification.
PEEK
The catalogue lists PEEK sheets and rods, including unfilled, 30% glass-filled, 30% carbon-filled and bearing grades. Fillers change mechanical, wear and electrical behaviour. Match the selected grade to the load, chemical exposure and temperature using its datasheet.
PVDF
The catalogue lists PVDF sheets and rods and names PVDF and PVDF-ELS grades. PVDF may be evaluated for chemical-handling parts, subject to grade-specific compatibility, temperature and purity requirements.
PAI (polyamide-imide)
The catalogue lists PAI sheets and rods under Torlon grades 4203, 4301, 5030 and 5530. Compare wear, load and temperature requirements against the exact grade data; these grades are not interchangeable.
PEI (polyetherimide)
The catalogue lists PEI sheets and rods in PEI-1000, PEI-2300, PEI-ELS and a medical-labelled grade. Any fire, electrical or medical requirement needs the documentation for the selected product and intended use.
PPS (polyphenylene sulfide)
The catalogue lists PPS sheets and rods in 40% glass-filled and medical-labelled grades. Check mechanical, chemical and temperature requirements against the exact grade datasheet and any required approval.
Rulon
The catalogue lists Rulon sheets and rods in LR, J and K grades. These materials are often evaluated for bearing and sliding parts. Confirm the mating surface, load, speed, temperature and chemical exposure for the chosen grade.
High Performance Plastics FAQs
What are High-Performance Plastics, and how are they different from general plastics?
High-performance engineering plastics are material families selected when a part needs properties beyond a general-purpose plastic. Temperature, chemical, wear and load limits vary by polymer and grade, so compare the exact product data against the application.
What types of High-Performance Plastics does Swees Engineering offer?
Swees Engineering provides a wide range of High-Performance Plastics, including PI (Vespel), PEEK, PVDF, PAI (Torlon), PEI (Ultem), PPS, and Rulon. These materials are available in various stock shapes and grades to meet specific industry requirements.
Which industries and applications benefit from High-Performance Plastics?
High-Performance Plastics are commonly used in industries such as aerospace, automotive, medical, electronics, and chemical processing. Applications include bearings, seals, gears, medical devices, high-temperature components, and parts exposed to aggressive chemicals.
What are the unique features of materials like PEEK, PVDF, and PAI?
-
- PEEK grades differ by filler and may be considered for demanding load, wear and temperature conditions.
- PVDF grades can be evaluated where chemical compatibility is important.
- PAI grades may be considered for high-load wear parts.
Confirm limits and certifications from the exact grade datasheet.
How can Swees Engineering assist? OR Why choose Swees Engineering for High-Performance Plastic?
At Swees Engineering, we aim to provide you with the solutions that fit your needs perfectly with our wide range of products and services. Contact us today.
At Swees Engineering, we aim to provide you with the solutions that fit your needs perfectly with our wide range of products and services. Contact us today.
Call us
(+65) 6292 5544
Fax
(+65) 6296 6521
Address
48 Toh Guan Road East
#03-140/141 Enterprise Hub
Singapore 608586
About us
Swees Engineering is committed in delivering high quality products to its clients globally.
Services
- Plastics Division
- Rubber Division
- Customized Services
Contact Us
info@sweesengrg.com.sg
(+65) 6292 5544
48 Toh Guan Road East
#03-140/141 Enterprise Hub
Singapore 608586

